INLET VALVES

There are a number of types of Inlet valves on the market, from standard plastic ball valves and float valves to electronic solenoid valves, each with its own specific qualities.

We supply a range of inlets that we believe are some of the best on the market.

Range of Inlets

Brass Equilibrium Ball Float Valves

Stainless Steel Ball Float Valves

Aylesbury Brass K TYPE Float Valves

Aylesbury Stainless Steel K TYPE Float Valves

Aylesbury Brass KAX TYPE Float Valves

Aylesbury Brass KB TYPE Float Valves

Aylesbury Brass KP TYPE Float Valves

Closed Solenoid Valves

All Valves are WRAS approved for potable water tanks

BRASS EQUILIBRIUM BALL FLOAT VALVES

EBCO BRASS EQUILIBRIUM BALL VALVE

Manufactured in Brass with supplied with a Copper float suitable for mains pressure upto 5 bar and water temperatures upto 60 deg C,
Additional adjustable drop arms to enable the valve to be fitted in a raised ball valve housings and can be used in conjunction with Screened Spillover Weirs to provide CAT 5, Type AB airgaps where required.
WRAS APPROVED
Solid Brass with BSP Threaded connector or PN16 Flanged connector, Copper float and Brass Drop arm.
Valve sizes: ½", ¾", 1", 1¼", 1½", 2", 2½", 3", 4"

PEGLAR EQUILIBRIUM BALL VALVE

Manufactured in Brass/Bronze with a Copper float suitable for mains pressure up to 10 bar and water temperatures up to 85 deg C, ideal for F&E Tanks and Hot Water Applications,
Available with options for an adjustable drop arms and adapter that enables the valve to be fitted in a raised ball valve housings and adjusted to reach teh required water level, can also be used with Screened Spillover Weirs to provide CAT 5, Type AB airgap Backflow Prevention where required.
WRAS APPROVED
Solid Brass/Bronze with BSP Threaded connector, Copper float and Brass Drop arm.
Valve sizes: ½", ¾", 1", 1¼", 1½", 2", 2½", 3", 4", 6"

STAINLESS STEEL BALL FLOAT VALVES

Manufactured in 316 Stainless Steel suitable for pressure up to 10 bar and water temperatures up to 150 deg C.
316 Stainless Steel with BSP Threaded connector or Flanged Connector and Stainless Steel float.
Valve sizes: ½", ¾", 1", 1¼", 1½", 2", 2½"

AYLESBURY FLOAT VALVES

These valves are approved by WRAS. Manufactured in brass (Also available in stainless steel for K Type Valves) and incorporating ceramic discs and a puncture proof float, enables them to far outperform conventional ball float valves. Suitable for mains pressure up to 10 bar and temperatures of water up to 60 Deg C, The delayed action results in full on flow when demanded and positive shut-off when desired water level is reached.

K TYPE BRASS

The weighted key-shaped float can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer.

Valve sizes: ½", ¾", 1", 1¼", 1½"SF, 1½"HF & 2"SF

KAX TYPE BRASS

The weighted key-shaped float with a longer float arm can be accurately set in a number of positions on the float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer.

Valve sizes: ¾", 1", 1¼" & 1½"SF

KB TYPE BRASS

The versatility of the Aylesbury 'KB' Type makes it suitable for installation either direct into a tank or into a raised valve chamber. Offers almost infinitely variable opening and closing water level settings.

Valve sizes:
¾", 1", 1¼ ", 1½"SF, 1½"HF, 2"SF, 2"HF, 2½"SF & 3"RB